Promise Technology Pegasus2 R2+ - I Nstalling the Promise U Tility on M Ac

instAlling the proMise utility on MAC
ThePegasus2R2+unitshipsreadytousewithoutcongurationorset-up.Howeveritisagood
idea to install the PROMISE Utility software even if you do not plan to make any changes to device
conguration.Theutilityisusefulformonitoringthesystemandgettingrmwareupdates.
TheutilityisnecessaryifyouplantochangethedefaultRAIDconguration(Pegasus2isshippedwith
aRAID0)orifyouwillswapoutanyoftheharddisksshippedwiththedevice.
The software utility installation package is located on the Pegasus2. Follow the instructions below to
install the utility.
To install the Pegasus2 Software Utility:
1. Double-click on the Pegasus2 icon on your desktop to view the device contents.
See example to right.
2. Findthele“R_PROMISE_Utility.dmg”anddouble-clickonittomountthevirtualdrivecontaining
the installation software package.*
3. Double-clickonthePROMISE_Utility.pkgletobeginthesoftwareinstallation.*
* Theversionnumberofthe.dmgleand.pkglewillchangeasitisupdated.Theversionnumberused
inthisexampleisjustforthepurposeofillustration.
20
Pegasus2 R2+ Product Manual