Promise Technology Pegasus2 R2+ User Manual

instAllAtion And setuP
This chapter covers installation and setup of the Pegasus2 R2+ on Mac and Windows computers.
However, since the process is a little different for the different operating systems, the hardware
installation and setup procedures are presented in separate sections according to the type of OS used.
Follow the procedure according to the instructions for the operating system that is being used with the
Pegasus2 R2+.
The Windows installation is covered in “Install on Windows computer” on page 13.
The Mac installation is covered in “Install on Mac” on page 19.
Other installation information and instructions include:
• “Connect the power cord” on page 23
• “Connect to your computer” on page 24
• “Power modes on the Pegasus2 R2+” on page 25
• “Shutting down the Pegasus2 R2+” on page 25
• “Daisy-chaining multiple Pegasus/Pegasus2 units” on page 26
• “Using the USB connection” on page 27
Promise Technology
11

Promise Technology Pegasus2 R2+ Specifications

General

Brand	Promise Technology
Model	Pegasus2 R2+
Category	Storage
Language	English