Promise Technology Pegasus2 R2+ - I Nadequate a Ir C Irculation; P Ower S Upply

inaDequate air circulation
Air circulation around the Pegasus unit might be a more complex problem. Check for these conditions:
• Accumulated dust or objects blocking the fans.
• Less than a minimum of 13 cm (5 inches) space between the back of the unit and the wall or other
object.
• Ambient temperature above 35°C (95°F) where the unit is operating.
To cool down a Pegasus unit:
• Correctanyproblemsidentiedabove.
• Shut down the Pegasus unit.
Press and hold the Power Button for a few seconds until the LED turns red. The PROMISE Utility
displays the message: Unable to connect to the device.
• Wait at least one hour, then restart the Pegasus unit.
Press the Power Button. The Pegasus boots within a few seconds.
poWer supply
ThepowersupplyusedinthePegasusunitisnoteld-replaceable.Ifthereisanyproblemwiththe
power supply, contact Technical Support to make arrangements for a repair. See “Contacting Technical
Support” on page 130.
59
Promise Technology