Promise Technology Pegasus2 R2+ - The PROMISE Utility

the ProMise utility
Use the PROMISE Utility to monitor the health of the Pegasus2 R2+ and, if you want to change the
RAID or format new storage drives in the HDD bays or Media Bay, use the utility to make settings
changes to installed storage.
This section contains the following topics:
• “PROMISE Utility in Mac”
• “Unlocking the UI in Mac”
• “The PROMISE Utility interface for Pegasus2 R2+”
• “Customize the Mac user interface”
• “Dashboard”
• “Device menus”
• “Physical Drive menu”
• “Partition”
• “RAIDConguration”
• “Updating Firmware in Mac”
28
Pegasus2 R2+ Product Manual