MVI69E-MBS ♦ CompactLogix Platform Start Here
Modbus Serial Enhanced Communication Module User Manual
ProSoft Technology, Inc. Page 11 of 154
June 28, 2017
1.2 Deployment Checklist
Before you begin to configure the module, consider the following questions. Your
answers will help you determine the scope of your project, and the configuration
requirements for a successful deployment.
Are you creating a new application or integrating the module into an existing
application?
Most applications can use the Sample Add-On Instruction or Sample Ladder
Logic without any modification.
Which slot number in the chassis does the MVI69E-MBS module occupy?
For communication to occur, you must enter the correct slot number in the
sample program.
Are the RSLogix 5000 and RSLinx software installed?
RSLogix and RSLinx are required to communicate to the CompactLogix or
MicroLogix 1500-LRP processor.
How many words of data do you need to transfer in your application (from
CompactLogix or MicroLogix 1500-LRP to Module / to CompactLogix or
MicroLogix 1500-LRP from Module)?
1.3 Package Contents
The following components are included with your MVI69E-MBS module, and are
all required for installation and configuration.
Important: Before beginning the installation, please verify that all of the following items are
present.
Modbus Serial Enhanced Communication
Module
RJ45 to DB9 Male Adapter cable. For DB9
connection to module’s serial application
ports
DB9 female to 9-pin screw terminal. Used
for RS422 or RS485 connections to Port 1
and 2 of the module
Ethernet straight-through cable
If any of these components are missing, please contact ProSoft Technology
Technical Support for replacement parts.
To Next Page
Loading...
