Page 95
P210, P220, P230, P240, P250, P260 - Relay Type
This parameter defines what type each relay should be, see the table below for
available options.
Relay not in use or programmed and LED will
always be off.
Relay is programmed as an alarm relay, which
will de-energise ON, and energise OFF.
This will ensure an alarm is raised if the
power fails to the unit.
Relay is programmed as a control relay,
which will energise ON, and de-energise
OFF.
Relay is programmed as a miscellaneous
relay, which will energise ON, and de-
energise OFF.
To Next Page
Loading...
Need help?
General
