Pulsar SLUDGE FINDER 2 - mA Output Menu

Page 74
Chapter 5 Menu System and Parameter Guide
This section outlines all parameters available in the Sludge Finder 2, as they
appear in the menu system.
Shown below is a set of charts to show you how all the various parts can be found
using the menu system.
For further details and a full description of all parameters refer to Chapter 6
Parameter Listings and Descriptions.
Top Level Menu
*This is only available in units with firmware version 1.1.0 or greater.
Compensation
mA Output
Display
Stability
Device Comm
System
Echo Process
Test
Relays
Application
Floc Alarm*
Data Logs