Page 104
Service Interval Alarm Parameters
See Service Manual for details.
Data Log Parameters
The data log parameters contains the following information.
Point 1 / Point 2
The following parameters give information on temperature conditions seen by the
Temperature source (P852/P1852) in ºC. All of these parameters are read only
and cannot be changed, though if P852/P1852 is changed they will be reset.
P1-P580, P2-P1580 Minimum Temperature
This parameter displays the minimum temperature recorded.
P1-P581, P2-P1581 Minimum Temperature Date
This parameter displays the date when the minimum temperature was recorded.
P1-P582, P2-P1582 Minimum Temperature Time
This parameter displays the time when the minimum temperature was recorded.
P1-P583, P2-P1583 Maximum Temperature
This parameter displays the maximum temperature recorded.
P1-P584, P2-P1584 Maximum Temperature Date
This parameter displays the date when the maximum temperature was recorded.
P1-P585, P2-P1585 Maximum Temperature Time
This parameter displays the time when the maximum temperature was recorded.
P1-P586, P2-P1586 Current Temperature
This parameter displays the current temperature.
To Next Page
Loading...
Need help?
General
