Page 56
Menu Keys
The menu keys have the following functions:
1) Arrow keys for moving left and right through the
menu system and used as ‘backspace’ when editing the
value of a parameter.
2) Used for changing display mode in run mode.
3) Used in test mode to simulate the level moving up and
down (right=up, Left=down).
1) Arrow keys for moving up and down through the
menu system
2) Used for changing displayed point of measurement in
run mode.
1) Used to confirm each action (for example, select a
menu option or accept a parameter number or value).
2) Used to confirm questions asked by your Sludge
Finder 2 such as before restoring factory defaults.
When in ‘program mode’ used to navigate back a level in
the menu system or back to run mode. Cancel a value
entered in error.
When in ‘run mode’ used to re-initialise the SF2 echo
trace, if the unit is thought to be reading the incorrect
value. This function should only be used by experienced
users, see Service Manual for further details.
To Next Page
Loading...
Need help?
General
