QNAP QGD-1602P User Manual

Component QGD-1600P-4G QGD-1600P-8G QGD-1602P-
C3558-8G
QGD-1602P-
C3758-16G
Graphics Intel® HD Graphics 600 - -
Memory
Pre-installed
memory
4 GB RAM: 1 x 4 GB
SODIMM DDR4
8 GB RAM: 2 x 4 GB
SODIMM DDR4
8 GB RAM: 1 x 8 GB
SODIMM DDR4
16 GB RAM: 1 x 16
GB SODIMM DDR4
Memory slots 2 x 4 GB SODIMM DDR4 2 x 32 GB SODIMM DDR4
Important
Use only QNAP memory modules to maintain system performance
and stability. For devices with more than one memory slot, use
QNAP modules with identical specications.
Using unsupported modules may degrade performance, cause
errors, or prevent the operating system from starting.
Maximum memory 8 GB RAM: 2 x 4 GB 64 GB RAM: 2 x 32 GB
Flash memory 4 GB (dual-boot OS protection)
Storage
Drive bays 2 x 2.5-inch SATA 6 Gbps
Note
The drive bays are backward compatible with SATA 3 Gbps drives.
Drive compatibility • 2.5-inch SATA hard disk drives
• 2.5-inch SATA solid-state drives
M.2 SSD slots - - 2 x PCIe Gen 3 x1
NVMe
2 x PCIe Gen 3 x2
NVMe
Tip
You can install an M.2 SSD expansion card in the PCIe slot.
M.2 SSD form factor - - 2280 2280
SSD cache
acceleration
support
This device supports SSD cache acceleration for all drives.
Hot-swapping The device supports hot-swapping drives
except for the following:
• M.2 SSDs
• SSD cache drives
Not supported
Network
10 Gigabit network
interface
- - 2 x 10 GbE SFP+
2.5 Gigabit network
interface
- - 8 x 2.5 GbE RJ45
Gigabit network
interface
• 2 x 1 GbE SFP/RJ45 combo ports
• 14 x 1 GbE RJ45
8 x 1 GbE RJ45
PoE support
QGD Rackmount Switch User Guide
Product Overview 6

QNAP QGD-1602P Specifications

General

Brand	QNAP
Model	QGD-1602P
Category	Switch
Language	English