quadient iX-3 Series User Manual

• Keep fresh water in the water reservoir.
• Clean the Brush Assembly weekly with fresh water.
• Rinse out the sponge with fresh water weekly.
• Replace the brush assembly when the moistener is not moistening properly.
• Replace the sponge when it begins to break down and not soak up water properly.
To clean the brushes and sponge of the feed table moistener:
1. Remove the moistener assembly from the table.
2. Raise the brush.
3. Lift the metal sponge retainer to remove the sponge.
4. Clean the sponge and the brush.
5. Reinstall the sponge and retainer.
6. Put the brush back.
13
Troubleshooting
249
| Page 249 | Apr-28-2023 03:14 |

quadient iX-3 Series Specifications

General

Envelope Feeding	Automatic
Label Dispenser	Optional
Print Technology	Inkjet
Connectivity	USB
Display	Touchscreen
Technology	Inkjet
Media Types	Envelopes, labels
Power Supply	100-240V, 50/60 Hz
Processing Speed	Up to 15, 000 letters per hour
Weighing Platform	Integrated weighing platform available