28
11.6. Negative
Possibility to change displaying mode – negative effect (dark background, light
signs).
11.7. Two platforms
Setting the parameter to YES causes displaying on the display results of
weighing from both platforms at the same time.
11.8. Automatic tare
This function is useful for quick determining net mass of weighed goods when
tare values are different for each weighings (see chapter 7.3. of this manual).
12. FUNCTIONS CONNECTED WITH RS 232 USE
User can set parameters needed for correct communication of balance with
computer or printer.
Fig. 14. Submenu RS 232 – setting
To Next Page
Loading...
