55
1- Field to introduce any text (digits, letters) to be placed on the label
2- As position 1
3- As position 1
4- As position 1
5- State of counter after which cumulative label will be initiated
6- Value of total quantity of pieces after which cumulative label will be initiated
7- Value of labels counter after which cc label will be printed
8- Value of total quantity of pieces after which cc label will be printed
9- Initial value of n1 counter
♦ After setting N1 parameter confirm with ENTER key.
♦ Move to weighing window
After exceeding set state of “n1” counter cumulative label will be printed (n2
counter will be incremented, n1 counter and “sums” indicator will be zeroed).
20.4. Initiating “cc label” by “n2” counter
Balance enables “cc label” initiating by means of determined state of “n2”
counter
♦ In “Operating settings” choose “cc label” position
♦ Change value of parameter on COUNTER
♦ Move to weighing window
♦ Press INSERT key. Screen as on drawing 30 will occur.
♦ After setting N2 parameter confirm with ENTER.
♦ Move to weighing window
After exceeding set state of “n2” counter cc label is printed (counter n1, n2 and
“sums” indicator will be zeroed).
Initial setting of „n1” counter is possible. This counter will be incremented from
given value. When function of cumulative labels printout initiating and/or “cc
labels” by states on “n1” and “n2” counters remember about dependence
n1 < N1
In case when:
n1 > N1 after pressing PRINT key cumulative label will be printed, “n1” will be
zeroed and “n2” will be incremented
n1 – value displayed in II line
N1 – introduced value (after pressing INSERT key)
To Next Page
Loading...
