RADWAG WLT L Series - 24. COOPERATION WITH PRINTER OR WITH COMPUTER; 24.1. Drawings of connection cables

74
24. COOPERATION WITH PRINTER OR WITH COMPUTER
Each pressing the < PRINT > key causes sending to computer or to printer
signal answering current state of display with mass units. Balance has factory
set speed of transmission 9600 bit/sec. If external device (printer, computer)
requires different speed of transmission change in balance menu setting of
speed of transmission parameter.
24.1. Drawings of connection cables
Fig. 51 Connection cable scale - computer
Fig. 52 Connection cable scale – printer (CITIZEN, EPSON) RS232
Fig. 53 Connection cable scale – printer (ZEBRA) RS232