RADWAG WLT L Series - 1 Unpacking of the Main Balance

5
1. UNPACKING OF THE MAIN BALANCE
Cut open tape protecting the box. Take out the balance of factory package and
place it on a stable base. Take out all components and assemble them
according to below drawings:
Fig 1. The components installation for the balance with pan size 165 x 165mm
For balances 300 x 300mm or 410 x 410mm put on the pan and set the scale
working according to the chapter 2 of this manual.
Fig 1-1. The balance with pan size 300 x 300mm