RADWAG WLT L Series - Choice of Non-Standard Printouts; Changing Set of Characters for EPSON TM-U220 Series (Polish Characters)

73
Text
Parameter number
1 2 3 4 5 6 7 8
19 Text 10 M a x i m a l
20 Text 11 m a s s c a n
21 Text 12 n o t e x c e
22 Text 13 e d t h e V
23 Text 14 a l u e 1 1 .
24 Text 15 2 5 0 g !
Method of entering texts
− from computer PS/2 keyboard
With F2 key enter the main menu and set the indicator of parameter by
P6 Printouts group and with
→ key enter menu group, next using
cursors set indicator of parameter by required parameter and with
→
key activate procedure of texts entering and using keyboard enter the
text (max 8 signs) and confirm with Enter key. Repeat the procedure for
remaining texts.
23.2.2. Choice of non-standard printouts
If printout as STANDARD is chosen printout will only contain weighing result
and variables declared in GLP menu. If one wants to print own non-standard
printout, choose type of printout (1-4) give beginning and end of printout.
23.2.3. Changing set of characters for EPSON TM-U220 series
(Polish
chara
cters)
To change a set of characters in EPSON TM-U220 printer, non-standard
printout needs to be defined: \p\0 . Then in „Labels DB” in „Fields” chose
„PRINTOUT 1”. Further procedure of defining printouts remains the same.