COMPUTER INTERFACE
5-12
ID:
This Section sets the identification that is used throughout
the datalog process. Both editing fields, Site and User,
can hold up to eight alphanumeric letters.
Security Level:
There are three levels of security. Use security level to
provide protection against unauthorized changes to the
monitor settings in the programming mode.
Level 0 allows the user to enter the programming menu
without password checking, but does not allow changes to
alarm limits, real time clock, correction factor, or user and
site information, etc. The user can still perform
calibrations.
If Level 1 is selected, a four-digit password is required to
enter the programming menu.
If Level 2 is selected, the programming menu may be
entered without restriction. Any changes made in the
programming menu can be saved.
Password:
Entry to the programming menu requires the four-digit
password be punched in if Level 1 is selected as the
security level.
User Mode:
In the Display mode, the user can view several readings
in the normal operation, but can not enter the
programming menu. In the Program mode, the user can
enter the programming mode to calibrate the monitor or
change various setups in the monitor.
To Next Page
Loading...
