R&S EB200 - Display Subsystem

EB200 Manual DISPlay subsystem
4052.2000.02 4.27 E-7
4.5.6 DISPlay subsystem
DISPlay
. :BRIGhtness <numeric_value>|MINimum|MAXimum
Controls the brightness of the display backlighting
Parameters:
<numeric_value> brightness of backlighting from 0 to 1
0 = backlighting off
1 = full backlighting
MINimum|MAXimum backlighting off|full backlighting
Remark:
The brightness can be set in 7 discrete steps. Intermediate values are therefore rounded to the nearest
discrete value.
*RST state:
1.0
Example:
DISPlay:BRIGhtness 0.5
. :BRIGhtness? [MINimum|MAXimum]
Query of brightness of display backlighting
Parameter:
none query of current brightness
MINimum|MAXimum query of lowest|highest brightness
Result:
Brightness of backlighting from 0 to 1
Example:
DISPlay:BRIGhtness? -> 0.5