EB200 Manual Operation
4052.2000.02 3.57 E-7
RS 232 control interface
If the unit is equipped with the RS232 control interface, a choice can be made between the modes
RS232 PPP and RS232 standard. See also Appendix A.
RS 232 PPP
In this operating mode, TCP/IP with the Point to Point Protocol is activated for remote control.
Configuration parameters
BAUD RATE: Baud rate: 50 to 115 k with many intermediate values
IP ADDRESS: Network ident of EB200
PORT: Remote control port
Softkeys
APPLY Branching to APPLY CHANGES submenu
STANDARD Switchover to RS232 standard
To Next Page
Loading...
