EB200 Manual Operation
4052.2000.02 3.1 E-7
3 Operation
3.1 Description of the front panel
Fig. 3-1: Front view
Table 3-1: Controls and displays
Item. Designation Function
1 N-connector Antenna connection
2 BW Bandwidth selection
3 MOD Selection of modulation mode FM, AM, PULSE, CW, USB, LSB or IQ
4 MGC Switches MGC function on or off. Adjustments with potentiometer (7).
5 SQU Switches the squelch function on or off. Adjustments with potentiometer (7).
6 TONE Switches the tone function on or off. Adjustments with potentiometer (7).
7 VAR pot Potentiometer for adjusting the values of MGC, SQU and TONE.
8 Volume control Volume control for headphones, loudspeaker and loudspeaker-output on the rear
panel
9 Spinwheel Selects frequency, memory location or configuration parameters
10 LOCK Key for enabling or disabling the spinwheel function
11 FRQ Key for entering receive frequencies
12 MEM Key for selecting the memory location number (0 to 999)
13 SEL For selecting parameters in the configuration menu
14 Decimal keypad For entering values into the editor, keys 0 to 9, decimal point and storage in the
current selection with the ENT key. With the keys FRQ, MEM, MGC, SQU and
TONE, the value is taken from the editor and stored directly.
15 ESC Closes editor or temporary window or for moving a level upwards in the menu tree.
To Next Page
Loading...
