R&S EB200 - 3.18 Softkey menus

EB200 Manual Operation
4052.2000.02 3.24 E-7
3.18 Softkey menus
The current menu is indicated indirectly by the display format.
The name of the menu will be found in a window above the SETUP softkeys.
POWER-ON menu
This menu display is shown for 30 s whenever the EB200 is turned on.
Note:
If the processor is supplied with expansion-RAM then
will be displayed instead of
.
As soon as keys or knobs are used, the MAIN menu appears.
MAIN menu
The MAIN menu can be recognized at the MAIN menu title at the lower right-hand side, above the
softkey area. According to configuration this menu can have a different appearance. Two variants are
exemplary represented here. Further variations can be selected and configured in the DISPLAY
submenu.
MAIN menu default setting
MAIN menu with DISPLAY-IF-PAN (option)
Further variations can be selected and configured in the DISPLAY submenu.