R&S EB200 - Calculate Subsystem

EB200 Manual CALCulate subsystem
4052.2000.02 4.20 E-7
. . . :TYPE MINimum|MAXimum|SCALar|OFF
Setting of the averaging procedure for the IF-panorama data
Parameters:
MINimum MIN hold function is on
MAXimum MAX hold function is on
SCALar AVG averaging function is on
OFF Switching on the Clear Write function
Note:
For
the SCALar averaging procedure the averaging time and measuring time can be set by
commands CALCulate:IFPan:AVERage:TIME and MEASure:TIME, respectively.
*RST state:
OFF
Example:
CALCulate:IFPan:AVERage:TYPE MAXimum
. . . :TYPE?
Query of the averaging procedure for the IF-panorama data
Result:
MIN MIN hold function is on
MAX MAX hold function is on
SCAL AVG averaging function is on
OFF Switching on the Clear Write function
Example:
CALCulate:IFPan:AVERage:TYPE? -> MAX
. . :CLEar
Restart of the MIN or MAX hold function for the IF-panorama data
Parameters:
none
Example:
CALCulate:IFPan:CLEar