R&S EB200 - Page 143

EB200 Manual SENSe subsystem FREQuency
4052.2000.02 4.69 E-7
. . . :STARt <numeric_value>|MINimum|MAXimum
Sets the start frequency of Digiscan
Parameters:
<numeric_value> frequency value
MINimum | MAXimum setting min/max start frequency
*RST state:
85 MHz
Example:
FREQuency : DSCan : STARt 118 MHz
. . . :STARt? [MINimum|MAXimum]
Query of the start frequency of Digiscan
Parameters:
none query of the current start frequency
MINimum | MAXimum query of min/max start frequency
Result:
frequency in Hz
Example:
FREQuency : DSCan : STARt?
→ 118000000
. . . :STOP <numeric_value>|MINimum|MAXimum
Sets the stop frequency of Digiscan
Parameters:
<numeric_value> frequency value
MINimum | MAXimum setting min/max stop frequency
*RST state
110 MHz
Example:
FREQuency : DSCan : STOP 136 MHz