EB200 Manual SENSe subsystem SWEep
4052.2000.02 4.90 E-7
. . :COUNt? [MINimum|MAXimum]
Query of number of sweeps
Parameters:
none query of current number of sweeps
MINimum|MAXimum query of minimum|maximum sweeps
Result:
Number of sweeps; 9.9E37 is output for an infinite number
Example:
SWEep:COUNt? -> 100
. . :DIRection UP|DOWN
Setting the scan direction
Parameters:
UP scan with increasing frequency
DOWN scan with decreasing frequency
*RST state:
UP
Example:
SWEep:DIRection DOWN
. . :DIRection?
Query of scan direction
Parameters:
none
Result:
UP, DOWN
Example:
SWEep:DIRection? -> DOWN
To Next Page
Loading...
