R&S EB200 - Page 173

EB200 Manual STATus subsystem
4052.2000.02 4.99 E-7
. . :PTRansition <numeric_value>
Setting the positive transition filter of the OPERation status register
Parameters:
<numeric_value> value of the PTRansition section (0..65535 or
#H0000..#HFFFF or #B0..#B1111111111111111)
*RST state:
will not be changed by *RST
Example:
STATus:OPERation:PTRansition #B11111111
. . :PTRansition?
Query of the positive transition filter of the OPERation status register
Parameters:
none
Result:
Depending on the setting by the FORMat:SREGister command, the contents of the register is
transferred as a decimal, binary or hexadecimal value in ASCII code.
Example:
STATus:OPERation:PTRansition? -> 255
Other STATus commands described below do not directly influence the STATus registers.