EB200 Manual Operation
4052.2000.02 3.5 E-7
DISPLAY (menu display modes)
DEFAULT (selection of display setting)
IF-PAN (IF panorama display)
LEVEL (level display as bar or numerically)
TONE (signal tone whose pitch depends on the signal level)
CONFIG (setting the selected display mode)
MORE (more menus)
FRQ (large frequency display)
CONFIG (setting of the selected display mode)
MORE (back to previous menus)
SETUP
KEYS (characteristics of spinwheel and keys)
MESSAGE (configuration of the acoustic and optical messages)
POWER (display of charging status)
REF (internal or external reference frequency)
AUX (configuration of the AUX port parameters)
REMOTE (configuration of the remote-control parameters)
STANDARD (simple ASCII protocol through the RS232 interface)
RS232 PPP (point-to-point protocol through the RS232 interface)
APPLY (transfer of the parameters)
YES (acknowledgement of the parameter transfer)
NO (refusal of the parameter transfer)
To Next Page
Loading...
