Safety
R&S
®
TS7124M
7User Manual 1525.5394.02 ─ 05
1 Safety
The product documentation helps you use the product safely and efficiently. Follow the
instructions provided here and in the following chapters.
Intended use
The R&S TS7124M RF shielded box is used in production, for service, repairs and
other applications.
It is intended for radiation testing of electronic devices. Use the device under test
(DUT) only with the appropriate, specially manufactured cables and adapters. Any
other use is regarded as improper use, which can result in safety hazards and dam-
age. The RF shielded box is only permitted to be operated within the permissible
parameter ranges as stated in the specifications. The RF shielded box is intended for
industrial use and must only be installed, operated, configured, maintained and
repaired by appropriately trained personnel.
Target audience
This document targets at all users, including installers, operators, technicians, mainte-
nance and service personnel.
Where do I find safety information?
Safety information is part of the product documentation. It warns you of potential dan-
gers and gives instructions on how to prevent personal injury or damage caused by
dangerous situations. Safety information is provided as follows:
●
In Safety instructions. The same information is provided in many languages in prin-
ted format. The printed "Safety Instructions" for "Heavy Product with Sliding Door"
(document number 1171.2626.99) are delivered with the product.
●
Throughout the documentation, safety instructions are provided when you need to
take care during setup or operation.
1.1 Safety instructions
Products from the Rohde & Schwarz group of companies are manufactured according
to the highest technical standards. To use the products safely, follow the instructions
provided here and in the product documentation. Keep the product documentation
nearby and offer it to other users.
Use the product only for its intended use and within its performance limits. Intended
use and limits are described in the product documentation such as the specifications
document, manuals and the printed "Safety Instructions" document. If you are unsure
about the appropriate use, contact Rohde & Schwarz customer support.
Using the product requires specialists or specially trained personnel. These users also
need sound knowledge of at least one of the languages in which the user interfaces
and the product documentation are available.
Safety instructions
To Next Page
Loading...
