Operating Instructions D50+ | P50+ | SHERAprint 50
Rapid Shape GmbH │ DOCR000438
1.4 Attached Safety Markings
WA RNING!
Danger from illegible signs!
Over time, labels and signs may become dirty or
otherwise unrecognisable, so that dangers cannot be
detected, and necessary operating instructions cannot
be followed. Thereby a risk of injury arises.
– All safety, warning and operating instructions
must always be in a legible state.
– Damaged labels and signs must be renewed.
The following labels and signs are in the work area. They refer to their
immediate environment.
The areas marked with this symbol can be live. Work in
these areas may only be carried out by qualified
electricians.
The build area of the machine marked with this symbol
consists of moving parts among others. Work in the build
area of the machine may only be carried out with the
machine in an inactive state. There is a danger of hand
injuries.
Working in the area of the machine marked with this sign
may result in exposure to UV radiation. Work in this area
may only be carried out when wearing UV protection
goggles.
Hot air fans marked with this sign can heat up and cause
hot surfaces on the fan housing. These surfaces are not
allowed to be touched when hot.
It is recommended to wear protective goggles to protect
the eyes from direct UV radiation.
To Next Page
Loading...
Need help?
General
