Rapid Shape D50+ - Serial Plate

Operating Instructions D50+ | P50+ | SHERAprint 50
Rapid Shape GmbH │ DOCR000438
22 │ 96
Figure 4: Build platform, with & without build platform splash guard
37
Rotary knob
41
Build platform splash guard
38
Platform
42
Splash guard handle
39
«FRONT» marking
40
Knurled thumb nut
Figure 5: Knife & (Knife)Drip guard
43
Blade
47
(Knife-)Drip guard
44
Locating pin
48
Retaining collars
45
Carrier plate
46
Knurled thumb nut
2.2 Serial Plate
The serial plate is located on the back of the machine. It shows the
most important technical data and the serial number of the machine.
Figure 6: Serial plate D50+ (example)