The standard delivery includes the following parts:
– 3D Printing System
– Starter package
Optionally, additional accessories can be supplied.
For more information, please contact Rapid Shape.
When not used for a prolonged period, store the machine
– in a dry, dust-free and frost protected room.
– on a horizontal and stable base.
– with all hoods closed.
– best secured in the original transport box using lashing straps to
protect against outside impact and tipping over (see note below)
Also make sure that no consumables are left remaining in the machine
and that coarse impurities have been removed.
NOTE!
The machine is supplied with an additional box with
lashing straps for return transport and for storing it in its
original packaging.
To Next Page
Loading...
