Rapid Shape D50+ User Manual

Operating Instructions D50+ | P50+ | SHERAprint 50
Rapid Shape GmbH │ DOCR000438
90 │ 96
10. Remove the paper towel from the right-hand end of the hose
with the stainless-steel tube and insert it into the (possibly newly)
material bottle provided.
11. Press the pump cover down to fix the hose back in the pump.
12. Insert the hose into the hose cut-out on the left-hand side of the
mounting plate and clamp it behind the lug provided. Close
both hoods again.
13. Return to the main menu.

Rapid Shape D50+ Specifications

General

Brand	Rapid Shape
Model	D50+
Category	3D Printers
Language	English