Rauch AXIS EMC ISOBUS - Description of the operating screen

2.2.1 Description of the operating screen
The exact representation of the working screen depends on the actual settings selected and on
the machine type.
Fig. 1: Machine control unit display
[1] Current application rate from the fertilizer
settings or the task controller
Button: direct entry of the application rate
[2] Fertilizer information display (fertilizer name,
working width and spreading disc type)
button
Button: Adjustment in the fertilizer chart
[3] Metering slide position, right/left
[4] Drop point position, right/left
[5] Quantity change, right/left
[6] Spreading disc speed, right/left
[7] Metering slide opening status, right/left
[8] Function keys
[9] Freely definable display fields
[10] AXMAT- Function is active
[11] Mineral fertilizer spreader display
[12] Selected operating mode
[13] Display of boundary/border settings
2. Layout and function
AXIS EMC ISOBUS 5902180-h-gb-
11