Rauch AXIS EMC ISOBUS - Display fields

Fig. 2: Machine control unit display
[1] Current application rate from the fertilizer
settings or the task controller
Button: direct entry of the application rate
[2] Fertilizer information display (fertilizer name,
working width and spreading disc type)
Button: Adjustment in the fertilizer chart
[3] Function keys
[4] Freely definable display fields
[5] Metering slide opening status, right/left
[6] AXMAT- Function is active
[7] PTO speed
[8] Drop point position, right/left
[9] Metering slide position, right/left
[10] Mineral fertilizer spreader display
[11] Selected operating mode
[12] Display of boundary/border settings
2.2.2 Display fields
The three display fields in the operating screen can be individually adjusted and assigned the following
values as desired:
• Forward speed
• Flow factor (FF)
• ha trip
• kg trip
• m trip
• kg left
• m left
• ha left
• Idle time (Time until the next idle measurement)
• Torque (Spreading disc drive)
2. Layout and function
12
5902180-h-gb- AXIS EMC ISOBUS