2.2.4 Display of sections
Fig. 5: Display of the section statuses
[1] Section/boundary spreading toggle key
[2] Reduce right section button
[3] Activated sections on entire working width
[4] Right section is reduced by several partial
sections
Further display and setting options are explained in chapter 5.5 Working with sections.
We recommend restarting the terminal in the following cases:
• You have changed the working width.
• You have opened a different fertilizer chart entry.
After restarting the terminal, the section display changes to match the new settings.
2. Layout and function
AXIS EMC ISOBUS 5902180-h-gb-
15
To Next Page
Loading...
