CAUTION!
Risk of injury due to moving machine parts
During the tests, machine parts may move automatically.
▶
Before carrying out the tests, ensure that nobody is present in the danger zone of the
machine.
4.7.3 Service
An input code is required to configure the settings in the Service menu. These settings can only be
modified by authorized service personnel.
4.8 Info
The Info menu provides information on the machine control unit.
This menu provides information on the configuration of the machine.
The information list depends on the equipment of the machine.
4.9 Weighing/Trip counter
This menu provides values regarding spreading work carried out and functions for the weighing
operation.
u
Access the menu Main menu > Weighing/Trip count..
The Weighing/Trip count. menu appears.
4. Operation
60
5902180-h-gb- AXIS EMC ISOBUS
To Next Page
Loading...
