• Idle measurement: This function key enables a manual start of the idle measurement. See
chapter 5.7.2 Manual idle measurement.
• Bound. sprd.type: You can choose between full border spreading or limited border spreading.
4.4 Fertilizer settings
In this menu, the fertilizer and spreading settings can be changed.
u
Access the menu Main menu > Fertiliser settings.
Not all parameters are displayed simultaneously on one screen. You can switch to the next or
previous menu windows (tabs) using the left/right arrow keys.
Fig. 10: Fertiliser settings AXIS-H menu, tab 1 and 2
Fig. 11: Fertiliser settings menu AXIS-M, tabs 1 and 2
4. Operation
AXIS EMC ISOBUS 5902180-h-gb-
31
To Next Page
Loading...
