4.12.2 Using the joystick
As an alternative to the settings in the working screen of the ISOBUS terminal, you may also use a
joystick.
If you wish to use a different joystick, please contact your dealer.
• Please observe the instructions in the operator's manual of the ISOBUS terminal.
n
CCI A3 joystick
Fig. 31: CCI A3 Joystick, front and rear
[1] Light sensor
[2] Display/touch panel
[3] Plastic grid (replaceable)
[4] Shift key
n
CCI A3 Joysticks operating levels
You can switch between three operating levels with the shift key. The
Level that is currently active is displayed by the positioning of a light strip
at the bottom edge of the display.
4. Operation
68
5902180-h-gb- AXIS EMC ISOBUS
To Next Page
Loading...
