4.4.10 Calculate OptiPoint
In the Calculate OptiPoint menu, you can enter the parameters to calculate the optimum turn-on and
turn-off distances in the headlands. For an accurate calculation, it is very important to enter the
distance factor for the fertilizer used.
For the aerodynamic factor of the fertilizer used please refer to the fertilizer chart of the machine.
u
Enter the required value in the menu Fertiliser settings > Distance factor.
u
Access the menu Fertiliser settings > Calculate OptiPoint.
The first page of the Calculate OptiPoint menu is displayed.
The indicated forward speed refers to the forward speed in the area of the switching positions! See
chapter 5.11 GPS control.
u
Enter the average forward speed in the range of switching positions.
The second page of the menu is displayed.
u
Press OK.
u
Press the Continue button.
The third page of the menu is displayed.
Fig. 15: Calculate OptiPoint, page 3
4. Operation
AXIS EMC ISOBUS 5902180-h-gb-
43
To Next Page
Loading...
