Fig. 45: Display of the idle measurement in the working screen
[1] Time until the next idle measurement
In the case of a reduced spreading disc speed, no idle measurement can be executed if limited
border spreading or section reduction are activated!
When the metering slides are closed, an idle measurement is always carried out in the background
(without alarm message)!
Do not reduce the engine speed during the idle measurement in the headlands!
The tractor and hydraulics circuit must have reached their operating temperature!
5.7.2 Manual idle measurement
In the case of unusual changes in the flow factor, start the idle measurement manually.
u
In the Main menu, press the idle measurement key.
The idle measurement is started manually.
5.8 Spreading with the AUTO km/h operating mode
This operating mode is applied by default for machines without a weighing system.
5. Spreading operation
86
5902180-h-gb- AXIS EMC ISOBUS
To Next Page
Loading...
