Fig. 26: Menu Weighing/Trip count.
Sub-menu Meaning Description
Trip counter Display of the fertilizer quantity spread,
area spread, and spread distance
4.9.1 Trip counter
Rest (kg, ha, m) For weighing spreaders only: Display of
the remaining quantity in the hopper
4.9.2 Rest (ka, ha, m)
Meter counter Display of the distance traveled since
the last reset of the meter counter
Reset (zeroing) by pressing the
C 100% key
Zero scales For weighing spreaders only: Weighing
value for empty scales is set to “0 kg”
4.9.3 Zero scales
4.9.1 Trip counter
In this menu, the values of the spreading work carried out can be obtained, the remaining spreading
quantity can be observed, and the trip counter can be reset by deleting.
u
Access the menu Weighing/Trip count > Trip counter.
The Trip counter menu appears.
During spreading, i. e. with the metering slides being open, you can switch to the Trip counter menu
and obtain the current values there.
If you wish to continuously observe the values during spreading, you may also assign the freely
selectable display fields in the working screen kg trip, ha trip or m trip, see 2.2.2 Display fields.
4. Operation
AXIS EMC ISOBUS 5902180-h-gb-
61
To Next Page
Loading...
