4.4.7 RPM
PTO
For optimal empty run measurement, check the correct input in the Fertiliser settings menu.
• The entries in the Spreading disc and PTO menu items must correspond to the actual settings
of your machine.
The specified PTO speed is preset in the control unit to 750 rpm as a standard factory setting. If you
want to specify a different PTO speed, you must change the saved value in the control unit.
u
Access the menu Fertiliser settings > PTO.
u
Enter the speed in rpm.
The Fertiliser settings window is displayed with the new PTO speed.
Please observe Chapter 5.6 Spreading with the automatic operating mode (AUTO km/
h + AUTO kg).
Normal disc speed
For optimal empty run measurement, check the correct input in the Fertiliser settings menu.
• The entries in the Spreading disc and Normal disc speed menu items must correspond to the
actual settings of your machine.
The factory default speed is set to 750 rpm. If you want to set a different speed, you must change the
saved value.
u
Access the menu Fertiliser settings > Normal disc speed.
u
Enter the speed value.
The Fertiliser settings window is displayed with the new speed.
Please observe Chapter 5.6 Spreading with the automatic operating mode (AUTO km/
h + AUTO kg).
4. Operation
AXIS EMC ISOBUS 5902180-h-gb-
41
To Next Page
Loading...
