Rauch AXIS EMC ISOBUS - Spreading with reduced sections: VariSpread V8

Button Spreading type
AXIS-H only
Boundary spreading function on both sides
u
Press the function key several times until the desired spreading type is displayed.
5.5.2 Spreading with reduced sections: VariSpread V8
You can spread fertilizer to sections on one or both sides, to adapt the full spreading width to the field
requirements. Every spreading side can be set continuously in the automatic mode and to a maximum
of 4 steps in the manual mode.
u
Press limited border spreading/sections toggle key.
Fig. 39: Working screen: Sections with 4 levels
[1] The right section is reduced to 2 steps.
[2] Function keys for increasing or reducing
spreading width on the right
[3] Function keys for increasing or reducing
spreading width on the left
[4] The left spreading side spreads across the
entire half.
5. Spreading operation
AXIS EMC ISOBUS 5902180-h-gb-
77