• Each section can be reduced or increased in steps.
We recommend restarting the terminal in the following cases:
• You have changed the working width.
• You have opened a different fertilizer chart entry.
After restarting the terminal, the section display changes to match the new settings.
u
Press the Reduce left spreading width or the Reduce right spreading width function key.
The section of the spreading side will be reduced by one step.
u
Press the Increase left spreading width function key or the Increase right spreading width function
key.
The section of the spreading side will be increased by one step.
The sections are not graded proportionally. The VariSpread spreading width assistant sets the
spreading widths automatically.
5. Spreading operation
78
5902180-h-gb- AXIS EMC ISOBUS
To Next Page
Loading...
