For uniform spreading of the spreading material, a constant forward speed must be applied in
manual operating mode.
Spreading in different operating modes is described in 5 Spreading operation.
Menu Meaning Description
AUTO km/h + AUTO kg Selecting automatic mode with automatic
weighing
Page 83
AUTO km/h Selecting automatic mode Page 86
MAN km/h Adjustment of forward speed for manual mode Page 87
MAN scale Dosing slider adjustment for manual mode
This operating mode is suitable for spreading
slug pellets or fine seeds.
Page 88
Operating mode selection
u
Start the machine control unit.
u
Access the menu Machine settings > AUTO/MAN mode.
u
Select the desired menu item from the list.
u
Press OK.
u
Follow the instructions on the screen.
We recommend having the flow factor displayed in the working screen. By doing so, you can
observe the mass flow control during spreading. See 2.2.2 Display fields.
• Important information on the use of operating modes for spreading operations is provided in
chapter 5 Spreading operation.
4.5.2 +/- quantity
In this menu, you can set the percentage increment of the application rate change for normal
spreading.
The base value (100%) is the preset value for the metering slider opening.
4. Operation
52
5902180-h-gb- AXIS EMC ISOBUS
To Next Page
Loading...
