Sub-menu Meaning Description
Change speed AXIS-H only
Activation of the function for
changing the speed in the
boundary spreading mode in the
working screen.
If this function is deactivated, the
change can only be made as a
percentage value (%).
Fertilizer info Activation of the fertilizer
information (fertilizer name,
spreading disc type, working
width) in the working screen.
kg level sensor Input of the remaining quantity to
trigger an alarm message via the
weigh cells
AXMAT AXIS-H 50 only
Activate the AXMAT function
Please observe the operator's
manual for the special
equipment.
Appl. corr. L (%)
Appl. corr. R (%)
Correction of the deviations
between the entered application
rate and the actual application
rate
• Correction in percent on the
right and/or left side
2 application rates Only when working with
application maps: Activation of
two separate application rates
for the right and left side,
respectively
4.5.1 AUTO/MAN mode
The machine control unit automatically adjusts the dosing quantity according to the speed signal. This
adjustment is influenced by the application rate, working width, and flow factor.
By default, the unit is operated in the automatic mode.
You only work in manual mode in the following cases:
• If there is no speed signal (radar or wheel sensor not available or defective)
• Application of slug pellets or seeds (fine seeds)
4. Operation
AXIS EMC ISOBUS 5902180-h-gb-
51
To Next Page
Loading...
