Rauch AXIS EMC ISOBUS - Page 50

Sub-menu Meaning Description
MAN scale Setting the manual scale value.
(only influences the respective
operating mode)
To be entered in a separate
input window.
MAN km/h Setting the manual speed. (only
influences the respective
operating mode)
To be entered in a separate
input window.
Speed/signal source Selection/limitation of the speed
signal
• Speed AUTO (automated
selection of either
transmission or radar/GPS
1
)
•
GPS J1939
1
Sim GPS speed For GPS J1939 only: Indication
of forward speed in the event of
loss of the GPS signal
NOTE!
The entered forward speed is to
be maintained constantly at all
times.
+/- appl. rate (%) Pre-setting the application rate
change for the different
spreading types
To be entered in a separate
input window
Task Control Activation of the ISOBUS Task
Controller functions for
documentation and for
application map spreading
• Task Control on (checked)
• Task Control off
GPS-Control Activation of the function to
control the machine sections via
GPS control unit
• Task Control on (checked)
• Task Control off
1
)
The manufacturer does not assume any liability in the event of a loss of the GPS signal.
4. Operation
50
5902180-h-gb- AXIS EMC ISOBUS