Rauch AXIS EMC ISOBUS - Page 4

4.4.1 Application rate 34
4.4.2 Set the working width 35
4.4.3 Flow factor 35
4.4.4 Drop point 37
4.4.5 Calibration 37
4.4.6 Disc type 40
4.4.7 RPM 41
4.4.8 Limited border spreading mode 42
4.4.9 Border spreading application rate 42
4.4.10 Calculate OptiPoint 43
4.4.11 GPS Control info 44
4.4.12 Fertilizer charts 45
4.5 Machine settings 49
4.5.1 AUTO/MAN mode 51
4.5.2 +/- quantity 52
4.6 Fast emptying 53
4.7 System/Test 55
4.7.1 Total data counter 56
4.7.2 Test/diagnosis 57
4.7.3 Service 60
4.8 Info 60
4.9 Weighing/Trip counter 60
4.9.1 Trip counter 61
4.9.2 Rest (ka, ha, m) 62
4.9.3 Zero scales 63
4.10 Operating lights (SpreadLight) 64
4.11 Hopper cover 65
4.12 Special functions 67
4.12.1 Changing the system of units 67
4.12.2 Using the joystick 68
4.12.3 WLAN module 71
5 Spreading operation 73
5.1 Requesting the remaining quantity during spreading 73
5.2 Refilling 73
5.3 TELIMAT border spreading unit 74
5.4 Electrical TELIMAT unit 75
5.5 Working with sections 76
5.5.1 Displaying the spreading type in the operating screen 76
5.5.2 Spreading with reduced sections: VariSpread V8 77
5.5.3 Spreading with reduced sections: VariSpread pro 79
5.5.4 Spreading operation with one section and in border spreading mode 82
5.6 Spreading with the automatic operating mode (AUTO km/h + AUTO kg) 83
5.7 Idle measurement 84
5.7.1 Automatic idle measurement 84
5.7.2 Manual idle measurement 86
5.8 Spreading with the AUTO km/h operating mode 86
Table of contents
4
5902180-h-gb- AXIS EMC ISOBUS