Rauch AXIS EMC ISOBUS - Page 89

For uniform spreading of the spreading material, a constant forward speed must be applied in
manual operating mode.
Fig. 46: MAN scale operating screen
[1] Display of metering slide target value scale
position
[2] Display of current metering slide scale
position
[3] Application rate adjustment
u
Access the menu Machine settings > AUTO/MAN mode.
u
Select the MAN scale menu item.
The Position of dosing slider opening window is displayed.
u
Enter the scale value for the dosing slider opening.
u
Press OK.
u
Switch to the working screen.
u
AXIS-H only: Press Spreading disc start.
u
Press Start/Stop.
The spreading starts.
5. Spreading operation
AXIS EMC ISOBUS 5902180-h-gb-
89