offered by Busse-Yachtshop.com
-5
Important Information
Intended use
This handbook provides information and instructions to assist in planning and
installing your Raymarine C-Series Display. It also provides information that will be
useful when you are connecting the C-Series Display to other equipment.
Safety notices
WARNING:Navigation aid
This product is intended to be used as an aid to navigation. Its
accuracy can be affected by many factors, including equipment
failure or defect, environmental conditions and incorrect
handling or use. It is the Users responsibility to exercise common
prudence and navigational judgement. This device should not be
relied upon as a substitute for such prudence and judgement.
WARNING:Product installation
This equipment must be installed in accordance with the
instructions in this handbook. Failure to do so could result in poor
product performance, personal injury and/or damage to the
vessel.
WARNING:Electrical safety
Make sure the power supply is switched off before making any
electrical connections.
WARNING:Electromagnetic energy
The radar scanner transmits electromagnetic energy. Ensure that
the scanner has been installed according to the recommendations
given in the relevant scanner handbook.
WARNING:Fishfinder sounder module
Removing the transducer cable from the rear of the fishfinder
sounder module whilst it is switched on can cause sparks. Only
remove the transducer cable after power has been switched off.
Ensure that the sounder module is mounted where it is well
ventilated and in an area free from flammable vapors.
To Next Page
Loading...
Need help?
General