React nomadio - Adjusting Throttle Dual Rate Using the Function Menu; Adjusting Throttle Dual Rate Using the Trim Button; Dual Rate and End Point Adjustment; Adjusting Throttle Dual Rate Increment

Adjusting Throttle Dual Rate using the Function Menu
Use the navigation controls to adjust throttle dual rate as follows:
1. Access the top function menu from
the driving screen.
2. Navigate to the Throttle (Ch2)
menu.
or then
3. Navigate to Dual Rate.
or
Value Description
1 Throttle/brake range is set to minimum.
1-99
Throttle/brake range is set to a percentage of full range.
For example, value “50” gives 50% of full servo range.
4. Change the value. or
100 Throttle/brake range is set to full (100%)
Adjusting Throttle Dual Rate using the Trim Button
You can also use the T1 trim button to adjust throttle dual rate.
Dual Rate and End Point Adjustment
Full servo range is determined by the throttle and brake end point adjustments. The dual rate value
determines the relative servo range between the throttle and brake end points. The servo will never
move beyond the set end point adjustments, no matter what dual rate setting is applied.
Adjusting Throttle Dual Rate Increment
Use the navigation controls to adjust throttle dual rate increment as follows:
1. Access the top function menu from
the driving screen.
2. Navigate to the Throttle (Ch2) menu
or then
3. Navigate to DR Increment.
or
Value Description
4. Change the value.
or
1-20
Throttle dual rate value changes by set
increment.
Use smaller values for finer dual rate control.
Use larger values for coarser dual rate
control.